top of page

Foundation Problems and Foundation Repair in California: What You Need to Know About Expansive Soils

Writer: Chatsky
Chatsky
7 days ago
7 min read

As a licensed Professional Engineer practicing in Los Angeles and Ventura County, one of the most common calls I receive is from homeowners concerned about cracks in their drywall that keep coming back after repair, cracks in their foundation/slabs and floors feeling uneven inside of the house. In many cases, the culprit isn’t the structure itself, it’s what’s underneath it. Expansive soil is one of the leading causes of foundation distress in California, and understanding how they work is the first step toward addressing the problem correctly.


What Are Expansive Soils?


Expansive soils are soils that shrink and swell depending on their moisture content. When expansive soils get wet, they swell up. When expansive soils dry up, they shrink. This cycle of movement sometimes can be just fractions of an inch, but sometimes several inches. The higher the expansion index, the greater the variation in volume due to changes in moisture content. And these changes in volume can generate a lot of stress on a structure.


The primary concern is soil containing expansive clay minerals. Certain clay minerals absorb water between their layers, causing the soil to swell significantly in volume; fine-grained soil is not necessarily expansive simply because it contains silt. California’s geology makes expansive soils extremely common. The Los Angeles Basin, San Fernando Valley, Ventura County, and surrounding foothill communities all have significant deposits of expansive clay soils.


Why Is This So Common in California?


California’s Mediterranean climate creates the perfect conditions for expansive soil damage. Our wet winters followed by hot, dry summers mean that soils go through dramatic moisture cycles every single year. A foundation that was built during a dry period may have been placed on soil that was relatively stable at the time, only to experience significant movement once the rainy season arrives and the soil swells beneath it.


Here are conditions and factors that make certain properties more vulnerable than others:


  1. Hillside locations: Water tends to migrate downhill and collect beneath foundations on sloped lots.

  2. Poor drainage: Improper grading or failed drainage systems that direct water toward the foundation.

  3. Mature trees and large shrubs: Tree roots extract moisture from the soil, causing localized drying and shrinkage beneath and around foundations.

  4. Leaking plumbing and sprinkler lines: A slow leak beneath a slab can introduce significant moisture into the soil over time and fine soils have difficulty draining.

  5. Irrigation patterns: Inconsistent or excessive landscape irrigation creates localized wet and dry zones beneath foundations

Warning Signs of Foundation Problems


As a Registered Professional Civil Engineer who specializes in structural design, I always tell homeowners to monitor and maintain their home with the same care they show their car. Regular maintenance is the best way to minimize problems and catching a problem early on is much cheaper to fix. Here are some things to look for if you’re concerned you might have problems caused by expansive soils.


Interior signs:


  1. Diagonal cracks at the corners of doors and windows. This can be a telling sign, because diagonal cracks can be indicative of differential settlement or heave.

  2. Doors and windows that stick, won’t close properly, or have developed gaps at the top corners

  3. Cracks in drywall, especially stair-step cracks that follow the drywall joints.

  4. Floors that feel uneven or slope noticeably in one direction

  5. Gaps between the floor and baseboards or between the wall and ceiling

Exterior signs:


  1. Cracks in stucco or brick, particularly diagonal cracks above or below windows.

  2. Cracks in the concrete foundation, stem walls and hardscape around the property.

  3. Dry soil with cracks that look like they’re in a spider web pattern.

  4. Sprinkler heads and vegetation close to the house.

One important distinction, not all cracks are structural. Hairline cracks in stucco or drywall are extremely common in California and are often the result of normal thermal expansion and contraction, not foundation movement. The key indicators of a structural concern are cracks that are wide, diagonal, growing over time, or accompanied by other symptoms like sticking doors or uneven floors. Cracks in drywall can also appear from lateral movement caused by earthquakes and/or winds. This is especially common in older homes which have not undergone seismic retrofits.


What Causes Foundation Damage From Expansive Soils?


Expansive soil damage typically falls into two categories:


  1. Differential Settlement: This occurs when one part of the foundation sinks more than another. In expansive soil conditions, this often happens when one area of soil dries out (perhaps under a tree or where drainage is better) while another area remains moist. The foundation moves unevenly, causing the structure above to rack and distort.

  2. Heave: The opposite of settlement, heave occurs when saturated expansive soils push upward against the foundation slab or footings. Slab-on-grade foundations are particularly vulnerable to heave. When expansive soil beneath a slab gets wet, it can push the slab upward with tremendous force, cracking it and displacing anything built on top of it.

In many California homes, it's possible for both to happen simultaneously in different areas of the same structure. While it may be difficult to determine conclusively, it is possible when one area of the house is saturated while another area is dried out.


Foundation Repair Options


Foundation repair is not one-size-fits-all. The right solution depends on the type of foundation, the severity of the movement, the soil conditions, and the cause of the problem. Here are the most common repair approaches I encounter and recommend:


  1. Drainage Correction and Waterproofing: Before any structural repair is undertaken, the source of the moisture problem must be addressed. This is critical; failing to correct drainage issues before repairing a foundation virtually guarantees that the problem will eventually come back. Solutions include re-grading the site to direct water away from the foundation, installing a new drainage system, and waterproofing the foundation walls to prevent water from seeping under the house.

  2. Pier and Grade Beam Systems: For foundations experiencing settlement, underpinning with deep piers is one of the most effective and permanent solutions. Helical piers are screwed into the ground to suitable bearing depths established for the project. Other underpinning systems may use driven or drilled elements. The appropriate system and depth depend on the geotechnical conditions and engineering design. The bearing capacity is higher deep down than at the surface and the moisture content doesn't vary as much. The foundation is then lifted and supported by these piers, bypassing the problematic surface soils entirely.

  3. Slab Lifting and Stabilization: For slab-on-grade foundations that have settled, mudjacking (pressure grouting) or polyurethane foam injection can be used to fill voids beneath the slab and lift it back toward its original elevation. This is a less invasive repair than pier installation but may not be appropriate for all conditions. Removing the old slab, preparing a better support for the slab, and installing a new slab is another way. It involves removing some of the soil under the slab, compacting the soil and getting it to an optimal moisture content, adding a layer of crushed gravel followed by installing a proper vapor barrier, and finally installing a new reinforced concrete slab. This doesn't just provide a better and more consistent support for the slab, but it also helps prevent moisture from rising through capillary action and damaging your finished floors.

  4. Soil Treatment: In some cases, lime stabilization of expansive soils can be performed. Lime or another additive is mixed into the soil to chemically alter the soil composition and help reduce the capacity of the soil to absorb water. This is more commonly used in new construction than in repair situations, but it can be appropriate in specific circumstances.

  5. Foundation Replacement: In severe cases where the foundation has deteriorated beyond repair, partial or full foundation replacement may be the most cost-effective long-term solution. This is particularly true for older homes with deteriorated concrete or unreinforced masonry foundations.

The Role of a Structural Engineer in Foundation Repair


If you suspect foundation problems at your property, the first call you should make is to a licensed structural engineer, not a foundation repair contractor. Foundation repair contractors are in the business of selling repairs. A structural engineer’s job is to objectively diagnose the problem, determine its cause, and specify the most appropriate and cost-effective solution. In many cases, I have evaluated properties where a contractor had proposed expensive underpinning work. The better approach is to start with correcting water flow and the drainage. It is also important to get a report from a geotechnical engineer that identifies the soil classification and recommends the different methods of repairing the foundation. Then the structural engineer designs the proper foundation based on the geotechnical report, and the geotechnical engineer reviews the final design before granting approval.



  1. Visual inspection of the structure above and below grade

  2. Review of any available geotechnical (soils) reports

  3. Assessment of crack patterns, floor elevations, and door/window performance

  4. Providing observations, making recommendations, and explaining potential causes. Sometimes even providing a written report when requested.

  5. Stamped engineering drawings and specifications when repairs are required

An engineer’s report provides independent documentation that may be useful to your insurance company, lender, and prospective buyers if you sell the property. Their requirements and acceptance criteria vary. Tax treatment depends on the property and the nature of the work; engineering services for a personal residence are not automatically deductible. Ask your CPA about your circumstances and consult IRS Publication 530 for general homeowner tax information.


Preventive Measures


The best foundation repair is the one you never need to do. Here are practical steps homeowners can take to minimize expansive soil damage:


  1. Maintain consistent soil moisture around the perimeter of your home year-round, because dramatic wet/dry cycles are the enemy

  2. Keep trees and large shrubs away from the foundation.

  3. Ensure proper drainage. The ground should slope away from your foundation at least 6 inches over the first 10 feet

  4. Fix plumbing leaks promptly. Even a slow drip beneath a slab can cause significant damage over time. Pay attention to your water bill and don't ignore unusually high water bills.

  5. Inspect your foundation annually. Walk the perimeter and look for new cracks or changes in existing ones. In general it is a good idea to perform regular inspections and regular maintenance on your home.

Concerned about foundation movement in Los Angeles or Ventura County? Contact German Engineering Design to discuss a structural inspection and the next steps for your property.

 
 
 

Recent Posts

See All

Comments


Additional Company Links

Accredited-Seals-US_Blue-VerticalABSeal-2911x2625-cf32c50_edited.jpg
  • Instagram
  • Yelp Social Icon
  • LinkedIn Social Icon

2026 by GERMAN ENGINEERING DESIGN AND CONSULTING SERVICES, INC.

bottom of page